Fluorinated Ethylene Propylene (FEP) Coating Applicator | Metal Coatings

Fluorinated Ethylene Propylene Coating Applicator

Find Coating By
Please select both options

FEP Coating

FEP (fluorinated ethylene propylene) nonstick coatings melt and flow during baking to provide smooth non-porous films with excellent abrasion resistance. Because the coating is non-porous its chemical resistance is superb. FEP coatings are extremely non-wetting and have a very low coefficient of friction. This coating has excellent release properties and is often used as a mold release coating. FEP coating is typically applied to a thickness of 1-2 mils and has an opperating temperature of 450°F. 

One of the most popular uses of FEP coatings is for industrial non-stick applications or any application needing a food grade coating.

Fluorinated Ethylene Propylene (FEP) Coating Statistics
Tensile Strength (ASTM D1708) 3400 psi
Elongation (ASTM D1457) 325%
Impact Strength (ASTM D256) No break
Hardness (ASTM D2240) 56 HB (shore D)
Abrasion Resistance (Tabor) 14.8 mg
Coefficient of Friction (ASTM D1894) .12-.20 static, .08-.3 dynamic
Dielectric Strength (ASTM D149) 1325 volts per mil
Use Temperature 450°F max
Melting Point 500°F
Thermal Conductivity 1.4 BTU-in/h-ft 2-°F
Chemical Resistance (ASTM D543) Excellent
Salt Spray Resistance (ASTM B117) Good
Water Absorption (ASTM D570) <.01%
Thickness .001" - .003"
Fluorinated ethylene propylene nonstick coating

Ask Us a Question

* Indicates a Required Field